Splicers and Splicing Accessories


Request a Quote Download PDF spec sheet

Adjustable Thermal Stripper

DPM Photonics offers an Adjustable Thermal Stripper that is compact, easy-to-use and designed to thermo-mechanically remove coatings from optical fibers. The heater is adjustable up to 200°C; far hotter than any competing product. This feature facilitates stripping extremely difficult and baked-on coatings and in some cases can even remove fluoroacrylate undercoatings.

Our Adjustable Thermal Stripper supports optical fibers with cladding diameters from 40μm to 1000μm, with buffer diameters up to 1200μm. This includes standard 250μm, 400μm, and 900μm coated fibers. Adjustable temperature and time settings allow it to adapt to stripping a variety of different coatings and cladding sizes.


  • Compact, low-maintenance bench top design
  • Supports cladding diameters from 40μm to 1000μm with buffer diameters up to 1200μm
  • Adjustable temperature and time settings to accommodate different fiber coatings
  • Available platforms that support Fujikura, Fitel, Ericsson, or use with 3SAE universal clamp


Supported Fiber Types: Adjustable: 40 – 1000μm coated

Supported Fiber Buffers: Adjustable: 80 – 1200μm

Adjustable Temperature Range: 60 – 200° C, or ambient

Adjustable Heat Time Range: 0 – 30 seconds (2 second increments)

External Power Supply: 100 – 240V AC, 47 – 63Hz

Dimensions: 129.5mm (W) x 73.5mm (D) x 71mm (H) (5.1” x 2.9” x 2.8”) Weight: 445 grams (<1 lb)